Profile for Alex F (admin)

  • OFFLINE
  • Rank: Administrator
  • Register Date: 20 Nov 2010
  • Last Visit Date: Yesterday
  • Time Zone: GMT -8:00
  • Local Time: 19:16
  • Posts: 46
  • Profile Views: 1581
  • Karma: 1
  • Location: Unknown
  • Gender: Unknown
  • Birthdate: Unknown

Signature

Posts

Posts

emo
Hello Andy,

Thank you for your posts, but the site is not up to date, that's why there are issues with pictures and videos.

Answering your question about fuel, we recommend SIG Champion fuel.
Best fuel suggestion ...
emo
Please ask these kind of questions in direct correspondence to us. The forum is reserved for customer-to-customer talks. The venturi is in stock and it is the kind with the bolt like you have. Thank you.
how to determine whi ...
emo
it is 061
how to determine whi ...
emo
What is the number on the crankcase?
how to determine whi ...
emo
You need a venturi assembly, here is a link:

www.nvengines.com/index.php?page=shop.pr...uemart&Itemid=65

It fits all models. It is currently out of stock, but we should get them soon. Thanks.
how to determine whi ...
emo
The bottom of the head should be flat. Place a graphite gasket on top of the copper one, tighten the head as tight as possible, and tighten three allen screws slightly.
gx .40 gas eng glow ...
emo
Remove the bolt and using a piece of wood tap slightly on the fuel nipple.
Ame Carb Removal
emo
No valve is required - just connect it to the tank.
.061 back plate with ...
emo
The head may start leaking if three allen head screws are overtightened, which warps the head. Remove the head, place a fine sand paper on a piece of glass and sand the bottom of the head slightly. Sanding will reveal high and low spots.
gx .40 gas eng glow ...
emo
Legitimate customers fill out our registration page and provide a paypal verified payment. In your case none of these were done.
New GX40 Gasoline en ...
emo
We do not ship to dubious customers. The engines are in stock.
New GX40 Gasoline en ...
emo
OS GGT 15 gasser is no competition - it is too heavy. We would like to make GX 60 and GX 90, but too busy at the moment. Some day...
Suggestions for NV 6 ...
Category: Suggestion Box
emo
Part number 101005. It is in the 061 parts section. Here is a link:

www.nvengines.com/index.php?page=shop.pr...uemart&Itemid=65

Since your engine works fine without the muffler pressure and floods when you connect the muffler to the tank, all you have to do is screw the needle clockwise - the more fuel pressure, the less needle valve opening...
.061 Start Up proble ...
emo
Make sure there is no compression leak through the head - drop some oil on the head and check for bubbles.
New GX40 Gasoline en ...
emo
Just keep in mind that you will have to re-tune the carburetor again once you switch to a different prop size.
New GX40 Gasoline en ...
emo
It has been designed, but when the production will start is still unknown - too busy at the moment. But the 60 gasser is high priority.
60 size gasser
emo
The engine is almost new - it has about 20 min running time. It was tested for RPM and performance. Retailed for $119.00, your chance to get it for $89.00. Comes with a full warranty as a new engine. Please email if interested.
Big Mig 40RC for sal ...
Category: Classified section
emo
Left
The oil hole on the ...
emo
Hi Mike,

For some reason our emails to you don't go through - AOL blocks them... Anyway, the engines are available, but the manual should be ready within two weeks. We will contact you then. Thank you
AX 40
emo
All NV needle valves have fine threads. If the fuel leaks through the thread due to high pressure, you can easily fix it. Take a 3 mm diameter silicone tubing, cut 5-7 mm, and put it on the thread. Screw the needle over it , which will squeeze the tubing and make a barrier for the leaks.
Fine thread needle v ...
More
Time to create page: 0.46 seconds
kac1968imagedsplay0803tjac

Member Login